ICOM IC-2200H VHF Mobile Two Way Radio

Specifications: This information is taken directly off of the Icom IC-2200H brochure.

General

Frequency range : Transmit range 144–148 MHz Receiver range 118–174* MHz * Guaranteed range 144-148MHz

Mode : FM, AM(Rx only)

Number of memory ch. : 207 (incl., 6 scan edges, 1 call Ch.)

Antenna connector : SO-239 (50 ohm)

Power supply requirement : 13.8 V DC ±15% (negative ground)

Frequency stability : ±10 ppm –10°C to +60°C

Current drain : Tx at 65 W: 15 A Rx Standby: 0.8 A Max. audio: 1.0 A

Usable temp. range : –10°C to +60°C; +14°F to +140°F

Dimensions (projections not included) : 140(W) × 40(H) × 146(D) mm; 5 1/2(W) × 1 9/16(H) × 7 3/4(D) in

Weight : 1.25 kg; 2.75 lb

Transmitter Output power (*approx.) : 65, 25*, 10*, 5* W selectable

Maximum frequency : ±5.0 / ±2.5kHz deviation (wide/narrow) Spurious emission : Less than –70 dB Microphone connector : 8-pin modular (600 ohm)

Receiver Receive system : Double-conversion superheterodyne system Intermediate frequencies : 1st 21.7 MHz 2nd 450 kHz Receive Sensitivity (at 12dB SINAD) : 0.133µV typical Squelch sensitivity : 0.100µV typical (threshold) Selectivity (wide/narrow) : More than 6/3 kHz at -6dB Less than 14/9 kHz at -60 dB Spurious and image rejection ratio : More than 60dBc typical Audio output power (at 13.8 V DC) : More than 2.4W at 10% distortion with an 8 ohm Ext SP connector : 3-connector 3.5 (d) mm (1/8")

Supplied Accessories Remote control microphone, HM-133V Microphone hanger* (*depending on version) DC power cable, OPC-1132 Spare fuse Mobile mounting bracket kit

All stated specifications are subject to change without notice or obligation